Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

Time-Lag Fuses vs Fast-Acting Fuses

As noted earlier, a time-lag fuse of the same rating has a higher breaking capacity than a fast-acting fuse. Does that mean that, in terms of protection, a time-lag fuse protects better than a fast-acting fuse?
 
 
A specialist at Joincircuit answers: under the same overcurrent load, a time-lag fuse clears more slowly than a fast-acting fuse. This does not mean that a time-lag fuse reacts slowly; it means that a time-lag fuse needs more energy in order to clear. (Related reading: Differences Between Fast-Acting and Time-Lag Fuses)
 
 
In other words, a time-lag fuse not only responds to overcurrent, it can also discriminate the type and the energy level of that overcurrent. The operating period of a time-lag fuse can therefore be regarded as the time it takes to judge the overcurrent.
 
 
Generally, overcurrent falls into two categories: surge and fault. A surge usually comes from charging and discharging at power on and off, or from the influence of the surrounding circuit; its pulse peak is high but short-lived, and the energy it releases is usually a current surge that a time-lag fuse can absorb without clearing. Fault current, by contrast, is continuous; even if its peak is not high, its energy far exceeds that of a surge overcurrent, and a time-lag fuse will still operate quickly and clear the circuit.
 
 
From this point of view, the slightly slower operation of a time-lag fuse does not impair its protective function; on the contrary, it strengthens that function by reducing the chance of nuisance operation, which is why it is used in a wider range of applications and protects many kinds of circuits.
 
 
Conversely, a fast-acting fuse clears with less energy and therefore operates faster. Because of the limits of particular situations, however, a fast-acting fuse is much safer and protects much better than a time-lag fuse in some special cases. In certain circuits, for example, the sensitivity and very rapid clearing of a fast-acting fuse are required; if a time-lag fuse were used there, clearing would be delayed and the product would develop problems.
 
 
The fuse element of a time-lag (delay) fuse is specially processed so that the fuse absorbs energy, and by adjusting the amount of energy absorbed it can both withstand inrush current and provide overload protection. (Recommended reading: What Factors Affect Fuse Performance)
 
 
So fast-acting fuses and time-lag fuses each excel in their own field, which is why the two types coexist, and the fuse type used differs from one situation and environment to another. In circuits with strict requirements a suitable fuse should be selected, while in ordinary circuits the two types are interchangeable