Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

Why Copper Wire Cannot Replace a Fuse

It is common knowledge that copper wire must never be used in place of a fuse — an absolute rule. But why? This article explains the reasons.
 
 
First, the materials. A fuse element is a low-melting alloy, while copper wire is a metal conductor, so the two differ greatly in resistivity, melting point and other properties. Fit copper wire and the circuit may fail to break when it should, and the appliance can be burned out. (Related link: Fuse materials, fuse composition and what a fuse does)
 
 
Second, the working principle. A fuse protects the circuit by melting in time when an overcurrent appears, so the equipment is not damaged. Because the fuse element is a low-melting alloy it melts easily, whereas copper has a much higher melting point: under overcurrent it will not melt, the current is never cut off automatically, and no protection is provided. That is dangerous.

 
Fuse and copper wire
 
 
Finally, when fitting a fuse you must choose one of a suitable rating. A fuse comes in many specifications, and the rated current is normally the parameter used to choose one. For fuses of the same material, the larger the cross-section diameter, the higher the rated current it may carry. Work out the maximum operating current A of the circuit from the product data, then select a rated current equal to or slightly above A.
 
 
If the rated current is too high, the fuse will not melt when an overcurrent appears, so it gives no protection — no different from fitting copper or iron wire. If the rated current is too low, the fuse will melt under normal operating current and cause unnecessary outages. Selection therefore has to weigh several factors, and the rating should sit slightly above the maximum current of the working circuit.
 
 
That covers why copper wire cannot replace a fuse. Readers who want to know more can leave a message on our contact page and we will answer as soon as possible. (Recommended reading: 250 V SMD fuse, 2410 SMD package, one-time fuse)