Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

TVS Diodes: Working Principle and Overview

The transient voltage suppressor, or TVS, is a highly effective protective device in diode form. Its electrical performance is determined by the P-N junction area, the doping concentration and the resistivity of the wafer. Its ability to withstand surge current is proportional to the P-N junction area.
 
 
When a reverse transient high-voltage surge strikes the two terminals of a TVS diode, the device changes from high impedance to low impedance within about 10⁻¹² s, absorbs surge power of up to several kilowatts, and clamps the voltage between its terminals to a preset value, effectively protecting precision components in electronic circuits from all kinds of surge pulses. (Related reading: TVS diode characteristics and the difference between unidirectional and bidirectional types)
 
 
Features of the TVS diode: fast response, small size, easily controlled clamping voltage, low leakage current, high transient power and high reliability. Within its working range a TVS diode performs reliably, degrades little and has a long service life, which is why it is so widely used in overvoltage circuit protection.
 
TVS diode
 
Transient voltage suppressor (TVS)
 
 
Applications of the TVS diode: TVS devices are generally used on semiconductors and sensitive components, in secondary power supply and circuit protection, and for ESD protection.
 
 
Working principle of the TVS diode: a TVS is used to suppress transient surges and is connected in parallel with the device it protects. Under normal conditions the TVS presents high impedance to the protected line. When the transient voltage exceeds its breakdown voltage, the TVS provides a low-impedance path for the transient current, so the current that would have flowed into the protected device is diverted through the TVS diode. The voltage across the protected device is thereby limited to the clamping voltage of the TVS. Once the overvoltage fault has cleared, the TVS returns to its high-impedance state. (Recommended reading: 5KA SMD 3216 gas discharge tube, JTS3216 series)