In the twenty-first century the switching power supply has become part of our lives. Its energy efficiency, environmental performance and high cost-effectiveness have carried it into everyday life and production, where it quickly replaced the traditional “linear supply” and earned wide praise in practical use.
A switching power supply uses modern power electronics to control the on/off time ratio of the switching device and so hold the output voltage stable. It is generally built from a pulse-width modulation (PWM) control IC and MOSFETs. (Related reading: Resettable Fuses in Automotive USB Systems)
All kinds of problems come up in the use of fuses. As a rule, when a fuse opens it shows that something inside the supply is wrong. The supply works at high voltage and high current, so any fluctuation in the mains makes the internal current rise instantly; once the fuse is pushed beyond what it can withstand, it opens.
Switching power supply
In this situation, check the rectifier diodes, the high-voltage electrolytic filter capacitors and the inverter power switching devices at the input of the supply, looking for breakdown, open circuit or other damage. If the fuse has definitely opened, first inspect every component on the board for scorching or leaked electrolyte; if nothing of the kind is found, use a multimeter to test whether the switching device is shorted.
When dealing with a blown fuse, never switch the unit on straight after a faulty component has been found and replaced; other high-voltage components may still be faulty and will damage the new part. After replacing a component, measure every high-voltage component in that circuit thoroughly before applying power. (Recommended reading: Protection of Automotive Central Locking Motors with Resettable Fuses)
The above is a brief outline of how to troubleshoot a switching power supply. If anything is still unclear, leave us a message and we will get back to you as soon as possible.