An LED wall washer, as the name suggests, washes a wall with light the way water flows over it. It is used mainly for architectural decorative lighting and for outlining the silhouette of large buildings. In the design of an LED wall washer, surge protection is a particularly important factor, so the protective components used in these luminaires are well worth examining. Which key electronic components are used for surge protection in an LED wall washer? Here is a brief explanation.
In an LED wall washer, the main devices used are one resettable fuse and one 6.8 V or 7.5 V TVS diode, and their interaction achieves effective surge protection. The RS485 interface runs at 5 V with only some ten milliamps of current, so it is easily damaged. A wall washer is easily miswired to 220 V during installation, may suffer wiring short circuits, and also needs surge protection. (Related reading: Guangdong LED industry enters a virtuous cycle, and the fuse industry is poised for growth)
Resettable fuses are connected in series with the A and B lines of the RS485 bus and have a very low resistance at room temperature. The TVS diode is connected in parallel across the A and B lines and is normally non-conducting. When lightning current, a short circuit or a misconnection to the 220 V line occurs, a high voltage and a large current are produced; the high voltage makes the TVS diode conduct, and the resulting large current flows through the resettable fuse, so that the resettable fuse trips quickly and switches from a low-resistance state to a high-resistance state, thereby limiting the current.
LED wall washer
This provides current-limiting protection for the whole RS485 circuit. After the power is switched off or the fault is cleared, the resettable fuse automatically returns to its low-resistance state and the LED wall washer circuit resumes normal operation. Without the resettable fuse, the sustained large current would quickly burn out the TVS diode, so in essence the resettable fuse works with the TVS diode to protect the system. (Recommended reading: Shenzhen Joincircuit Industrial Co., Ltd. at the 2015 Guangzhou LED Expo)
The above is a brief collection of LED wall washer information we have put together for you. If anything remains unclear, leave us a message on our Contact Us page and we will reply to you as soon as possible.