Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

How to Install a Household Fuse Correctly: Method and Precautions

Many people are handy around the home and test and replace fuses themselves whenever a small appliance misbehaves. But how well do you really know the correct way to install a fuse and the precautions involved? This article sets out both.
 
 
A household fuse is a protective device fitted in an appliance circuit, and it allows only normal current to pass. When a short circuit or an overload occurs, the heating effect of the current raises the circuit temperature above the melting point of the fuse element, the fuse blows and the circuit is opened, which protects the circuit. To prevent fires caused by overcurrent faults and to make the fuse safer in service, observe the following points when using and installing a fuse: (Related reading: Why a copper wire must not be used in place of a fuse)
 
 
First: never use a fuse that is too thin. The thickness of the fuse element determines its rated current, and a thin fuse will blow under normal current, causing unnecessary power outages. Choose an appropriate wire gauge.
 
Fuse
 
 
Second: choose a fuse that suits the actual household load. As a rule the melting current of a fuse is 1.5 to 2 times its rated current, so the rating follows from the combined power of the appliances in the circuit.
 
 
Third: if the fuse rating is correct but the fuse still blows, the wiring or the appliance is at fault. Have an electrician find the actual cause. Never replace the fuse with copper wire, iron wire or any other metal wire, or with a fuse of larger rating.
 
 
We hope this article has given you a better understanding of how to install a household fuse and what to watch out for. If anything is unclear, or if there is a related topic you would like us to cover, leave a message for us on the Contact Us page and we will reply as soon as possible. (Recommended reading: Current Analysis of SMD Fuses, SMD Fuse Current)