Selecting a PTC thermistor for overcurrent protection means choosing a part that suits the ambient temperature, maximum working voltage, working current and protection current of the circuit or product being protected.
How is a thermistor selected? A PTC thermistor is an electronic overcurrent protection component. It is made of a high-molecular-weight organic polymer that, under high pressure, high temperature and vulcanization, is compounded with conductive particles and then processed by a special technique. PPTC devices are traditionally called resettable fuses. A PTC thermistor is mainly used to provide overcurrent protection in electrical appliances, so a resettable fuse is characterized by its voltage rating, current rating, holding current and trip time. Selection must therefore match the voltage, current and protection current of the product concerned. The procedure is as follows:
1. First determine the maximum ambient temperature at which the protected circuit works normally, together with its working current, maximum working voltage, required protection current and trip time.
3. Choose a product series whose voltage rating is equal to or higher than the maximum working voltage.
4. Using the maximum ambient temperature and the working current, refer to the temperature derating curve of the resettable fuse and pick the specification whose holding current fits.
5. Check the trip-time curve of the selected resettable fuse to confirm that its protection trip time meets the requirement.
How is a thermistor selected? The steps above summarize how to choose a PTC thermistor. If anything is still unclear, please leave a message on the Contact Us page of our website and we will reply as soon as possible.