Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

Precautions for Surge Protection Components

A reader with the online name “Dreaming of Him, Dreaming of Her” sent an email asking: what precautions should be taken when using surge protection components?
 
 
Specialists at Shenzhen Joincircuit Industrial Co., Ltd. reply: because surge protection components are important for safety, they must be used with great care. The precautions are as follows:
 
 
1. A switching component must not be connected across an active circuit on its own for differential-mode protection; to avoid a short circuit in the supply, a voltage-limiting component must be connected in series. (Related article: Differences Between Switching and Voltage-Limiting Components in Surge Protection)
 
 
2. The surge current through a surge protection component must be lower than its peak pulse current. Varistors should be selected according to their derating characteristics.
 
 
3. For a surge protection component used for differential-mode protection, the minimum breakdown voltage must be higher than the maximum operating voltage of the line.
 
 
4. For a surge protection component used for differential-mode protection, the clamping voltage must be lower than the highest safe voltage that the protected equipment can withstand.
 
 
These are the precautions for using surge protection components that we have put together. If anything remains unclear, leave a message for us on the contact page and we will reply as soon as possible. (Recommended reading: Why Circuit Protection Components Matter More Than Ever)