Shenzhen JDT Fuse Industrial Co.,Ltd
Phone : 0755-8830-8258
Postcode : 518129
E-Mail : andyzheng@jdtfuse.com
URL : http://www.joincircuit.com/
How to Replace a Car Fuse in an Emergency
How to Replace a Car Fuse in an Emergency——“Car fuse” is the term we use in everyday speech; officially it is a “fuse”, and it does much the same job as the fuse in your home. When the circuit current becomes abnormal and exceeds the rated current, the fuse melts and protects the circuit.
The conductor inside a fuse is made of a metal similar to solder, with a melting point lower than that of ordinary wire. The conductor is dimensioned by very precise calibration so that, once the rated current is reached, it generates enough heat to melt the conductor and open the circuit. A fuse has two important operating parameters: the working voltage and the rated current. When buying or replacing a fuse, the vehicle owner should choose according to the voltage and current in the circuit.
How to Replace a Car Fuse in an Emergency——In appearance, a car fuse is quite different from an ordinary household fuse: it is more “miniature” and is colour-coded to show its amperage. (Related article: Current Status and Changing Landscape of the Automotive Fuse Industry)
Having been introduced to fuses, we first need to know where they are installed. A car normally has two fuse boxes. One sits inside the cabin near the driver's seat and keeps the cabin electrical equipment working, for example the cigarette lighter, power seats and airbags. The other is mounted in the engine compartment and protects the electrical equipment outside the cabin: the ECU, lights, washer fluid, horn, ABS and other circuits all need fuses for protection.
How to Replace a Car Fuse in an Emergency——When the current in a circuit is too high, the fuse blows and so protects the circuit. In other words, once the fuse has blown the circuit is open, the equipment on that circuit stops working, and it is time for us to replace the fuse. Replacement is very simple: just two moves, “pull it out” and “push it in”.
The new fuse must have the same rating as the blown one, and above all the same amperage. Never fit a fuse with a higher amperage than the original, and never use a piece of wire. Take a simple example: if the original fuse has a rated current of 1 A and you fit a 5 A fuse, then when a short circuit or fault occurs the fuse will not blow, so it no longer protects the circuit, and the result is damage to the equipment on that circuit. (Recommended reading: Car Fuses: What You Need to Know)
Car fuse
How to Replace a Car Fuse in an Emergency——A blown fuse may have a damaged housing, so the amperage marking on top can no longer be read. That does not matter, because each colour stands for a specific amperage: just match the colour. Fuse colours follow an international standard: 2 A grey, 3 A violet, 4 A pink, 5 A tan, 7.5 A brown, 10 A red, 15 A blue, 20 A yellow, 25 A clear, 30 A green and 40 A deep orange.
Some readers ask: what if the car breaks down on the road and there is no spare fuse? Do not worry. In an emergency you can replace it with a fuse of the same amperage taken from a circuit that serves non-essential equipment. For example, if the engine circuit fails, you can use the fuse from the sunroof circuit instead, start the car normally, and then buy a new fuse as soon as possible.
How to Replace a Car Fuse in an Emergency——Fuses are in fact very cheap, only a few cents each, and a box of spares costs about ten yuan, yet it can solve a very big problem. (Recommended reading: What to Do When the Wiper Fuse Blows)
That is our brief explanation of how to replace a car fuse in an emergency. If you have any suggestions or anything you do not understand, please leave a message for us on the Contact Us page of our website, and we will reply as soon as possible.