Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

LED Backlight Production Process

The LED backlight production process—at that time, ultra-compact tungsten filament lamps were used as backlights for aircraft instruments. That was the initial stage in the development of backlights. After half a century of development, backlighting has become an independent branch of electronics and is steadily becoming a focus of research and development.
 
 
LED backlights and CCFL backlights are basically the same in structure; the main difference is that an LED is a point light source while a CCFL is a linear light source. In the long term, LED backlighting, as a replacement technology, is bound to become increasingly widespread. (Related reading: Classification of LED Backlights)
 
 
Below is a preliminary look at the LED backlight production process:
 
 
A. Cleaning: the PCB or LED lead frame is cleaned by ultrasonics and then dried.
 
 
B. Die mounting: silver epoxy is applied to the bottom electrode of the LED chip (large wafer), and the wafer is then expanded. The expanded chip (large wafer) is placed on a die-mounting stage, where, under a microscope, a die-mounting pen places the dies one by one on the corresponding pads of the PCB or LED package; sintering then cures the silver epoxy.
 
 
C. Wire bonding: an aluminium-wire or gold-wire bonder connects the electrodes to the LED die to form the leads through which current is injected. Where the LED is mounted directly on the PCB, an aluminium-wire bonder is generally used. (Gold-wire bonding is required for white TOP-LEDs.)
 
 
D. Encapsulation: epoxy is dispensed to protect the LED die and the bond wires. When dispensing onto the PCB, the shape of the cured epoxy is subject to strict requirements, since it directly affects the light output of the finished backlight. This step also covers phosphor dispensing for white LEDs.
 
 
E. Soldering: if the backlight uses SMD LEDs or other pre-packaged LEDs, the LEDs must be soldered to the PCB before assembly. (Recommended reading: Applications of Shenzhen Joincircuit Industrial Co., Ltd. in High-Power LED Lighting)
 
 
F. Film cutting: a punch press die-cuts the various diffusion films, reflective films and other films required for the backlight.
 
 
G. Assembly: as specified on the drawings, the various backlight materials are fitted by hand in the correct positions.
 
 
H. Testing: the photoelectric parameters and the light output uniformity of the backlight are checked.
 
 
I. Packaging: the finished products are packed as required and taken into stock.
 
 
The LED backlight production process—the above is a brief explanation of the LED backlight production process. In practice, LED backlights are used in a very wide range of applications, so it is well worth understanding the production process. If anything remains unclear, please leave a message for the editor on our Contact Us page and we will answer you at the earliest opportunity. (Recommended reading: The Channel Battle for LEDs: What Impact on Fuses)