Shenzhen JDT Fuse Industrial Co.,Ltd
Phone : 0755-8830-8258
Postcode : 518129
E-Mail : andyzheng@jdtfuse.com
URL : http://www.joincircuit.com/
Fuse Selection Guide|How to Choose|Principles
Fuse Selection Guide|How to Choose|Principles——A fuse is an electrical device that, when the current exceeds a specified value, melts its fuse element with the heat generated by the current itself and so breaks the circuit. In the industry, this device is also called a fuse. It is connected in series in the circuit, and when a short circuit or a serious overload occurs in the circuit or in the electrical equipment, the fuse element melts first and isolates the circuit or the equipment from the supply, giving protection. It is a protective device.
The type of fuse should be selected according to the application. For example, power distribution networks generally use knife-contact fuses; motor protection generally uses screw-type fuses; lighting circuits generally use cylindrical cap fuses; and for protecting thyristors, fast-acting fuses for semiconductor protection should be chosen. (Related article: What Fuse Rating Should I Choose)
Fuse Selection Guide|How to Choose|Principles——Rated voltage: the rated voltage UN of a fast-acting fuse should be slightly higher than the AC voltage that the fault circuit applies across its terminals after the fuse has blown. If the load of the semiconductor equipment is an inverter-type load, such as an active inverter or an inverter-fed braking motor, the possibility of a DC-side short circuit of the equipment caused by loss of control of the semiconductor devices must be taken into account. In that case, when the fast-acting fuse blows, the AC voltage and the DC voltage appear superimposed across the fuse element, so the rated voltage of the fast-acting fuse should be calculated as follows: UN ≥Uac+Udo×1/√2, where Uac is the AC voltage applied after the fast-acting fuse blows and Udo is the inverter-type DC voltage at the load end of the semiconductor equipment.
Fuse Selection Guide|How to Choose|Principles——Rated current: the rated current INF of a fuse is calculated on the basis of the RMS current IF actually flowing through the fuse in the circuit, with allowance for ambient temperature, cooling conditions, current margin and other factors. INF≥K×IF, where K is usually taken as 1.5~2. For naturally cooled fuses a larger value of K should be used, and for circuits in which the conductors connected to both ends of the fuse are especially short the maximum value should be used; for water-cooled fuses a smaller value should be used. Choosing too high a rated current for a fast-acting fuse inevitably raises its I2tF value, which is harmful to the protection of semiconductor devices. (Recommended article: Professional Fuse Manufacturer)
Principles of fuse selection: when choosing the type of fuse, the main considerations are the protection characteristics of the load and the magnitude of the prospective short-circuit current.
Fuse Selection Guide|How to Choose|Principles——That is a brief explanation of fuse selection. If anything is still unclear, please leave a message for us on the Contact Us page and we will reply as soon as possible. You can also click QQ on the website to consult our online sales staff, and we will be glad to answer any question you may have about fuses. (Recommended reading: Fuse Terminology: One Device, Two Names)