Shenzhen JDT Fuse Industrial Co.,Ltd
Phone : 0755-8830-8258
Postcode : 518129
E-Mail : andyzheng@jdtfuse.com
URL : http://www.joincircuit.com/
Fuses: Low Melting Point and High Resistance
Yesterday we received an email from a reader who calls himself “I Want to Fly Out of the Ivory Tower”, asking about fuse materials. Earlier articles have covered Fuse Materials and What Can Replace a Fuse, and this reader wanted to know why a fuse requires a low melting point and a relatively high resistance. Today we have put together a short summary of the relevant knowledge in the hope that it proves useful.
A fuse protects a circuit: when the power or the current in the circuit becomes too large, or when a short circuit occurs, the fuse melts. It is well known that P = I²R. For a given current through the fuse, the higher the resistance, the greater the power; and since W = PT, a larger P over a given time gives a larger W, that is, more heat is generated. Because the melting point of the fuse is low, it melts in time and so protects the circuit.
A fuse is normally connected in series in the circuit, and while a series connection divides voltage, a parallel connection divides current. The heating effect of current also tells us that, for the same energised time, the higher the resistance, the more heat the current produces. Household appliances are usually connected in parallel across the line, so the voltage stays constant while the current varies; when an appliance draws too much power (P = UI) the current rises, and because the fuse in series with the line has a high resistance it produces more heat, so its low melting point makes it the first part to melt and the circuit is protected. (Related reading: Fuses and tubular fuses: the difference and a short selection guide)
On the other hand, when current flows through a conductor the conductor heats up, because every conductor has some resistance. The heat generated follows the formula Q = 0.24I²RT, where Q is the heat, 0.24 is a constant, I is the current through the conductor, R is the resistance of the conductor and T is the time the current flows. From this formula the simple working principle of the fuse is easy to see.

Leaded resettable fuse
Once the fuse materials and the shape have been fixed, the resistance R is more or less set (ignoring the temperature coefficient of resistance). When current flows through it, it heats up, and the heat generated grows with time. The current and the resistance set the rate at which heat is produced, while the construction of the fuse and the way it is mounted set the rate at which heat is dissipated. If heat is produced more slowly than it is dissipated, the fuse will not melt.
If heat is produced at the same rate as it is dissipated, the fuse will not melt for a very long time either. If heat is produced faster than it is dissipated, the heat accumulates. Because the fuse has a certain specific heat and mass, the accumulated heat shows up as a rise in temperature, and once the temperature rises above the melting point of the fuse, the fuse melts. That is the working principle of a fuse. (Recommended reading: How a Fuse Works)
We hope this explanation has given you a clearer understanding of why a fuse requires a low melting point and a relatively high resistance. If anything remains unclear, please leave us a message on the Contact Us page and we will reply as soon as possible.