Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

Resettable Fuse Overcurrent Protection

In an earlier article we looked at the use of resettable fuses for protection in a no-smoking device, and you should now have a clear picture of resettable fuse solutions. Today we take a brief look at overcurrent protection solutions built on resettable fuses.
 
 
The power supply is the heart of every powered electronic or electrical device, supplying the energy it needs to work reliably. The output port of the supply differs from device to device, but all power ports are exposed to surge currents, so the FAE engineers at Joincircuit design overcurrent protection schemes according to the protection level of the power port of each electronic or electrical device.
 
 
In earlier protection scheme articles we have shared a number of base-station power supply protection schemes for DC12V/DC24V/AC24V/AC220V/-DC48V. Engineers interested in the design and selection of such power supply protection schemes can visit our website or consult our online sales staff. This article focuses on a detailed analysis of power port overcurrent protection solutions based on resettable fuses, and on the selection of overcurrent protection devices for power ports.
 
 
Protection against excessive current can take the form of a fuse or of a resettable PTTC (polymer positive temperature coefficient) device. Whether to use a PTTC device or a one-time fuse depends on the design of the power port overcurrent protection scheme, on the category of hazard the equipment may be exposed to, and on the relevant safety requirements.
 
 
PTTC devices are commonly used in circuits that draw a high inrush current at start-up. They tolerate the start-up surge and help reduce the damage caused by a blown fuse. A fuse is well suited to circuit designs where self-resetting is not wanted, or to circuits that only fail when the system itself fails.
 
 
The above is a brief account of overcurrent protection solutions based on resettable fuses. If anything remains unclear, leave us a message on the Contact Us page and we will reply as soon as possible.
 
 
Where a soft-start circuit is used to limit the inrush current, that is a workable solution as well. Joincircuit can supply small PTTC device samples and provides a free EMC laboratory, offering designers a full range of overcurrent protection design, modification and test services.