
Bourns MF-MSMF Series 1812 SMD PPTC resettable fuses, 18 models, hold current 0.10A-2.60A, max voltage 6V-60V, AEC-Q200 qualified.
The Bourns MultiFuse® MF-MSMF series is a family of 1812 (4532 metric) surface-mount PTC resettable fuses. The series covers 18 models with hold currents from 0.10 A to 2.60 A and maximum voltages from 6 V to 60 V. All models are qualified to AEC-Q200 Rev-C, making them suitable for overcurrent and overtemperature protection in automotive electronics.
The table below lists the complete electrical ratings from page 1 of the datasheet — all 18 models, none omitted. All values are at 23 ℃.
| Model | Ihold Hold A | Itrip Trip A | Vmax V | Imax A | Rmin Ω | R1max Ω | Trip current A | Trip time s | Pd W |
|---|---|---|---|---|---|---|---|---|---|
| MF-MSMF010 | 0.10 | 0.30 | 60.0 | 40 | 0.70 | 15.00 | 0.5 | 1.50 | 0.8 |
| MF-MSMF014 | 0.14 | 0.34 | 60.0 | 40 | 0.40 | 6.50 | 1.5 | 0.15 | 0.8 |
| MF-MSMF020 | 0.20 | 0.40 | 30.0 | 80 | 0.40 | 6.00 | 6.0 | 0.06 | 0.8 |
| MF-MSMF020/60 | 0.20 | 0.40 | 60.0 | 40 | 0.40 | 6.00 | 1.5 | 0.15 | 0.8 |
| MF-MSMF030 | 0.30 | 0.60 | 30.0 | 10 | 0.30 | 3.00 | 8.0 | 0.10 | 0.8 |
| MF-MSMF050 | 0.50 | 1.00 | 15.0 | 100 | 0.15 | 1.00 | 8.0 | 0.15 | 0.8 |
| MF-MSMF075 | 0.75 | 1.50 | 13.2 | 100 | 0.11 | 0.45 | 8.0 | 0.20 | 0.8 |
| MF-MSMF075/24 | 0.75 | 1.50 | 24.0 | 40 | 0.11 | 0.45 | 8.0 | 0.20 | 0.8 |
| MF-MSMF110 | 1.10 | 2.20 | 6.0 | 100 | 0.04 | 0.21 | 8.0 | 0.30 | 0.8 |
| MF-MSMF110/16 | 1.10 | 2.20 | 16.0 | 100 | 0.04 | 0.21 | 8.0 | 0.30 | 0.8 |
| MF-MSMF110/24X | 1.10 | 2.20 | 24.0 | 20 | 0.06 | 0.18 | 8.0 | 0.50 | 0.8 |
| MF-MSMF125 | 1.25 | 2.50 | 6.0 | 100 | 0.035 | 0.14 | 8.0 | 0.40 | 0.8 |
| MF-MSMF150 | 1.50 | 3.00 | 6.0 | 100 | 0.03 | 0.120 | 8.0 | 0.5 | 0.8 |
| MF-MSMF150/24X | 1.50 | 3.00 | 24.0 | 20 | 0.03 | 0.120 | 8.0 | 1.50 | 1.0 |
| MF-MSMF160 | 1.60 | 2.80 | 8.0 | 100 | 0.035 | 0.099 | 8.0 | 2.0 | 0.8 |
| MF-MSMF200 | 2.00 | 4.00 | 8.0 | 40 | 0.020 | 0.080 | 8.0 | 3.0 | 0.8 |
| MF-MSMF250/16X | 2.50 | 5.00 | 16.0 | 100 | 0.015 | 0.100 | 8.0 | 5.0 | 1.2 |
| MF-MSMF260 | 2.60 | 5.20 | 6.0 | 100 | 0.015 | 0.080 | 8.0 | 5.0 | 0.8 |
Note: Rmin is the initial resistance of a new device. R1max is the maximum resistance after one trip and recovery. The difference can reach twenty times, so use R1max when calculating voltage drop in a high-impedance circuit.
Hold current derates with ambient temperature. Page 4 of the datasheet gives the complete numerical table. Each cell below is the usable hold current at that temperature, in amperes.
| Model | -40 ℃ | -20 ℃ | 0 ℃ | 23 ℃ | 40 ℃ | 50 ℃ | 60 ℃ | 70 ℃ | 85 ℃ |
|---|---|---|---|---|---|---|---|---|---|
| MF-MSMF010 | 0.16 | 0.14 | 0.12 | 0.10 | 0.08 | 0.07 | 0.06 | 0.05 | 0.03 |
| MF-MSMF014 | 0.23 | 0.19 | 0.17 | 0.14 | 0.12 | 0.10 | 0.09 | 0.08 | 0.06 |
| MF-MSMF020 | 0.29 | 0.26 | 0.23 | 0.20 | 0.17 | 0.15 | 0.14 | 0.12 | 0.10 |
| MF-MSMF020/60 | 0.29 | 0.26 | 0.23 | 0.20 | 0.17 | 0.15 | 0.14 | 0.12 | 0.10 |
| MF-MSMF030 | 0.44 | 0.39 | 0.35 | 0.30 | 0.26 | 0.23 | 0.21 | 0.18 | 0.15 |
| MF-MSMF050 | 0.77 | 0.68 | 0.59 | 0.50 | 0.44 | 0.40 | 0.37 | 0.33 | 0.29 |
| MF-MSMF075 | 1.15 | 1.01 | 0.88 | 0.75 | 0.65 | 0.60 | 0.55 | 0.49 | 0.43 |
| MF-MSMF075/24 | 1.15 | 1.01 | 0.88 | 0.75 | 0.65 | 0.60 | 0.55 | 0.49 | 0.43 |
| MF-MSMF110 | 1.59 | 1.43 | 1.26 | 1.10 | 0.95 | 0.87 | 0.80 | 0.71 | 0.60 |
| MF-MSMF110/16 | 1.59 | 1.43 | 1.26 | 1.10 | 0.95 | 0.87 | 0.80 | 0.71 | 0.60 |
| MF-MSMF110/24X | 2.00 | 1.70 | 1.40 | 1.10 | 0.95 | 0.88 | 0.80 | 0.73 | 0.61 |
| MF-MSMF125 | 1.80 | 1.63 | 1.43 | 1.25 | 1.08 | 0.99 | 0.91 | 0.81 | 0.68 |
| MF-MSMF150 | 2.17 | 1.95 | 1.72 | 1.50 | 1.30 | 1.18 | 1.09 | 0.97 | 0.82 |
| MF-MSMF150/24X | 2.10 | 1.90 | 1.70 | 1.50 | 1.25 | 1.13 | 1.00 | 0.88 | 0.69 |
| MF-MSMF160 | 2.30 | 2.20 | 1.90 | 1.60 | 1.45 | 1.30 | 1.15 | 1.03 | 0.91 |
| MF-MSMF200 | 3.08 | 2.71 | 2.35 | 2.00 | 1.80 | 1.60 | 1.50 | 1.40 | 1.25 |
| MF-MSMF250/16X | 3.90 | 3.42 | 2.96 | 2.50 | 2.24 | 1.98 | 1.85 | 1.29 | 0.94 |
| MF-MSMF260 | 4.00 | 3.52 | 3.06 | 2.60 | 2.34 | 2.08 | 1.95 | 1.39 | 1.04 |
The 23 ℃ column equals the rated Ihold — use it to confirm you are reading the correct row. For MF-MSMF010, only 0.06 A remains at 60 ℃, sixty percent of the rating. Selecting at 0.10 A for an enclosure that reaches 60 ℃ will cause nuisance tripping.
The MF-MSMF part number has five segments:
MF - MSMF 075 / 24 - 2 | | | | +-- Packaging: -2 = tape and reel (EIA 481-1) | | | +-------- Higher voltage option: /16 = 16V, /24 = 24V, /60 = 60V | | | X = freeXpansion design | | +------------ Hold current: 075 = 0.75A, 110 = 1.10A | +------------------ Series: MSMF = 1812 SMD package +------------------------ MultiFuse product designator
The same base model with different suffixes can carry different ratings. MF-MSMF075 is rated 13.2 V while MF-MSMF075/24 is rated 24 V — identical hold current and resistance, but usable in completely different circuits. Always verify the suffix along with the base model number.
Overcurrent and overtemperature protection in automotive electronics, hard disk drives, PC motherboards and peripherals, point-of-sale (POS) equipment, PCMCIA cards, USB 2.0/3.0 and OTG interface protection, and HDMI 1.4 source protection.
The product image on this page is our own photograph, cleaned to a white background. It is not a manufacturer rendering.
The marking has two parts: the first two characters are the model identifier, the last two are the production date code. For MF-MSMF010-2 the marking 106U means 10 is the MF-MSMF010 identifier and 6U is the date code (year plus bi-week). The date code changes with each production lot; the model identifier does not. The date code on your shipment will differ from the one shown here.
The datasheet states “Typical Part Marking, Layout may vary” — this is what it refers to.
The complete datasheet is available for download above. It contains dimensions, the soldering profile, reliability test conditions and reel specifications. Contact us if you need the derated hold current for a specific application.
Up Page:Is the first!
Next Page:Bourns MF-MSMF010-2 Resettable Fuse 0.10A 60V 1812