≡ Param Finder by package / current / voltage

Hold current 0.75A, maximum voltage 6V, 1206 package. For 0.75A loads on 5V buses. Post-trip resistance 0.40Ω, breaking capacity 100A. Recovers automatically after the fault is cleared.

Brand:BOURNS (Joincircuit is an authorised distributor)
Category:Resettable fuse / SMD, 1206 SMD (3216 mm)
Voltage:6 V; Current:hold 0.75 A; trip 1.5 A.

Specifications

ParameterValue
Hold current0.75 A
Trip current1.5 A
Maximum voltage6 V
Maximum fault current100 A
Initial resistance0.1 Ω
Post-trip max resistance0.4 Ω
Trip current / time— A / — s
Dissipated power0.4 W
Package1206 SMD (3216 mm)

Selection Notes

1. 6V Fits 5V Rails Only; 12V Breaks It Down on Contact

Its place is a 5V bus such as a USB port, where a surge to 5.5V is still in range. Do not use it on a 12V input port; it is overvoltage as soon as power is applied. For 0.75A in a 12V system, choose MF-MSMF075, 13.2V/100A. For a 24V system, choose MF-MSMF075/24, rated 24V with breaking capacity down to 40A.

2. 0.30V Drop and 0.23W of Self-Heating

Post-trip resistance is 0.40Ω maximum, a 0.30V drop at 0.75A, 6% of a 5V rail. Power is 0.30V×0.75A=0.23W against a 0.40W dissipation rating. Self-heating takes more than half of that, and a higher ambient pulls the hold current down. On a board carrying 0.75A on the 5V rail, do not skimp on pad and copper area.

3. Stepping Up to 050 Trades Voltage for Resistance, Not Current

050 is 0.50A/13.2V/0.70Ω; this part is 0.75A/6V/0.40Ω. From 050 to 075 you gain 0.25A of current and 43% lower R1max, and the rating drops from 13.2V to 6V. For 0.75A while keeping 13.2V, only the 1812 MF-MSMF075 works. The package changes from 1206 to 1812, so board space has to be reserved again.

Up Page:

Next Page: