≡ Param Finder by package / current / voltage

Hold current 1.10A, maximum voltage 6V, 1206 package. For 1A-level loads and USB ports on 5V supply rails. Post-trip resistance 0.20Ω, breaking capacity 100A. Recovers automatically after the fault is cleared.

Brand:BOURNS (Joincircuit is an authorised distributor)
Category:Resettable fuse / SMD, 1206 SMD (3216 mm)
Voltage:6 V; Current:hold 1.1 A; trip 2.2 A.

Specifications

ParameterValue
Hold current1.1 A
Trip current2.2 A
Maximum voltage6 V
Maximum fault current100 A
Initial resistance0.06 Ω
Post-trip max resistance0.2 Ω
Trip current / time— A / — s
Dissipated power0.6 W
Package1206 SMD (3216 mm)

Selection Notes

1. Soldered onto 12V, 6V Breaks Down on First Power-Up

A 1.10A load usually sits on a 5V rail, where the 6V rating is enough. Equipment fed from a 12V adapter must use a higher-rated part. For 12V use MF-MSMF110/16, 16V/100A, R1max 0.21Ω. For 24V use MF-MSMF110/24X, breaking capacity down to 20A, R1max 0.18Ω.

2. 0.22V Drop Is Small, but R1max Is 3.3x Rmin

New condition is 0.060Ω, a 0.066V drop at 1.10A. After trip the limit is 0.200Ω, a 0.22V drop, 4.4% of a 5V rail and 6.7% of a 3.3V rail. That ratio is the smallest in 1206; 150 is 4.3x and 200 is 4.25x. If the downstream is sensitive to 0.22V, size the position ahead of the regulator on the post-trip value.

3. 150 Has 35% Lower Resistance and a Trip Point 0.80A Higher

150 is 1.50A/6V/0.13Ω, 0.07Ω lower than this part. At a 1.00A load this part has 10% margin and 150 has 50%. The absolute trip currents are 2.20A and 3.00A. If the supply delivers at most 2.5A, 150 never reaches its 3.00A trip point.

Up Page:

Next Page: