≡ Param Finder by package / current / voltage

Hold current 1.50A, maximum voltage 6V, 1206 package. For 1.5A loads on 5V rails. Post-trip resistance 0.13Ω, breaking capacity 100A. Recovers automatically after the fault is cleared.

Brand:BOURNS (Joincircuit is an authorised distributor)
Category:Resettable fuse / SMD, 1206 SMD (3216 mm)
Voltage:6 V; Current:hold 1.5 A; trip 3 A.

Specifications

ParameterValue
Hold current1.5 A
Trip current3 A
Maximum voltage6 V
Maximum fault current100 A
Initial resistance0.03 Ω
Post-trip max resistance0.13 Ω
Trip current / time— A / — s
Dissipated power0.6 W
Package1206 SMD (3216 mm)

Selection Notes

1. 6V Holds the 1.50A Step Inside 5V Systems

With 1.2A to 1.5A on a 5V rail, this part's voltage rating and current both line up. On 12V equipment it breaks down outright, regardless of current. For 1.50A at 12V use MF-SM150, 15V/100A, R1max 0.25Ω. For 1.50A at 24V use MF-MSMF150/24X, breaking capacity 20A, R1max 0.12Ω.

2. 0.195V Drop, Second Lowest in the Line

Post-trip resistance is 0.130Ω maximum, a 0.195V drop at 1.50A. That is 3.9% of a 5V system, 0.025V below the 0.22V of 110. The 200 part is 0.170V, the only step in the line lower than this one. Drop is not the weak point here, so select on current margin instead.

3. Between 150 and 200, Trip Current Differs by 1.00A

200 is 2.00A hold, 4.00A trip, R1max 0.085Ω. From 150 to 200 the hold current rises 0.50A and the trip current moves from 3.00A to 4.00A. If the supply delivers at most 3.5A, 200 never reaches its 4.00A trip point and heats continuously. In that case keep 150, so the 3.00A trip point falls within the supply's capability.

Up Page:

Next Page: