≡ Param Finder by package / current / voltage

Hold current 2.00A, maximum voltage 6V, 1206 package. For 2A loads on 5V buses. Post-trip resistance 0.085Ω, breaking capacity 100A. This is the highest-current step in the 1206 line; recovers automatically after the fault is cleared.

Brand:BOURNS (Joincircuit is an authorised distributor)
Category:Resettable fuse / SMD, 1206 SMD (3216 mm)
Voltage:6 V; Current:hold 2 A; trip 4 A.

Specifications

ParameterValue
Hold current2 A
Trip current4 A
Maximum voltage6 V
Maximum fault current100 A
Initial resistance0.02 Ω
Post-trip max resistance0.085 Ω
Trip current / time— A / — s
Dissipated power0.7 W
Package1206 SMD (3216 mm)

Selection Notes

1. The Highest Current in 1206, with Only 6V of Rating

2.00A hold current with a 6V rating fits 5V supply rails only. Add this part to a 12V bus and it breaks down at power-up, taking the whole downstream load down. For 2.00A at 12V, switch to MF-SM200, 15V/100A, R1max 0.125Ω. That part is the SM package, so its board footprint differs from 1206.

2. 0.17V Drop, but the 0.34W of Heat Is the Real Issue

Post-trip resistance is 0.085Ω maximum, a 0.170V drop at 2.00A, 3.4% of 5V. Power is 0.170V×2.00A=0.34W against a 0.70W dissipation rating. Running 2A in a small package makes pad and copper area the deciding factor for temperature rise. With too little copper the hold current falls early and the 2.00A rating cannot be used in full.

3. It Is the End of the 1206 Current Line; Above It, Change Package

1206 steps run from 0.12A to 2.00A, and beyond that come 1812 and 1210. The 1812 MF-MSMF200 is 2.00A, 8V, 40A, R1max 0.080Ω. Only 2V more rating, and breaking capacity falls from 100A to 40A; a bigger package does not buy margin. For more current, move to the 2920 MF-LSMF260X, 2.60A, 24V, 20A.

Up Page:

Next Page: