≡ Param Finder by package / current / voltage

Hold current 1.50A. Maximum voltage 6V. 1210 package. For overcurrent protection on 5V boards and high-current interfaces. Post-trip resistance 0.11Ω. Breaking capacity 40A. Recovers automatically after the fault is cleared.

Brand:BOURNS (Joincircuit is an authorised distributor)
Category:Resettable fuse / SMD, 1210 SMD (3225 mm)
Voltage:6 V; Current:hold 1.5 A; trip 3 A.

Specifications

ParameterValue
Hold current1.5 A
Trip current3 A
Maximum voltage6 V
Maximum fault current40 A
Initial resistance0.03 Ω
Post-trip max resistance0.11 Ω
Trip current / time— A / — s
Dissipated power0.6 W
Package1210 SMD (3225 mm)

Selection Notes

1. 1.50A is the series limit, and the rating falls to 6V

USMF hold current goes up to 1.50A. From 0.50A the rating drops to 13.2V, and from 1.10A it drops to 6V. This part sits in the highest current tier and the lowest voltage tier. Nothing in USMF gives 1.50A above 12V.

2. A 0.165V drop, 3.3% of a 5V system

Post-trip resistance is 0.11Ω, a 0.165V drop at 1.50A. That is 3.3% of a 5V system, leaving 4.83V at the load. A new part measures 0.03Ω, a 0.045V drop at the same current.

3. The 110 drops 0.315V at 1.50A

The 110 holds 1.10A with 0.21Ω post-trip resistance. At the same 1.50A its drop is 0.315V against 0.165V here. Both are 6V, 40A parts, and the difference is the current-tier margin. A 1.50A load runs 0.40A above the 110 hold current.

Up Page:

Next Page:Is the last one!