Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

Gas Discharge Tube vs. Varistor: Differences

People often write in to ask how a gas discharge tube differs from a varistor, and how each one works. Here is a short explanation.
 
 
A gas discharge tube is usually fitted on the first, or the first two, stages of multistage circuit protection, mainly to discharge lightning transient overcurrent and to limit overvoltage. A varistor is a resistive device with a non-linear voltage-current characteristic, used mainly to clamp the voltage across a circuit under overvoltage and to absorb the excess current, so that sensitive components are protected. Both guard against overvoltage, but their applications differ fundamentally. (Related reading: What Types of Varistors Are There? Function and Working Principle of Varistors)
 
 
How a gas discharge tube works: under normal conditions the tube presents a high resistance. When the voltage across its terminals exceeds the tube's own set value, the gas inside conducts, which in effect short-circuits that voltage and protects the circuit.
 
 
How a varistor works: under normal conditions, while the voltage across the varistor stays below its threshold, the current through it is very small. The varistor then behaves like an infinite resistance, equivalent to an open switch. When the voltage across the varistor exceeds the threshold, the current through it is large and the varistor behaves like a very small resistance, equivalent to a closed switch.
 
 
The comparison above shows that, because the two work in different ways, their range of applications differs widely. Gas discharge tubes are used where voltages are high, lightning protection being the common case, while varistors are mostly used to protect sensitive components inside a circuit.
 
 
Because the two differ fundamentally and have different protection voltage coefficients, they are used in different voltage environments. Their drawbacks: once a varistor breaks down it stays short-circuited, and a gas discharge tube that has broken down once no longer protects. (Recommended reading: JTS3216 Series 5KA SMD3216 SMD Gas Discharge Tubes)