Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

How to Prevent Fuse Holder Failures

How can fuse holder failures be prevented? The best way is to get the design and the part selection right from the start. A good fuse design should limit the maximum current at the equipment's main terminals to 75% of the total circuit current; accurate fuse selection and correct installation avoid short circuits and a number of potential faults.
 
 
In a circuit, overheating, overvoltage and surge currents can all damage semiconductors. The most common case is the thyristor failure mode, which is handled as a normal failure mode. These problems are solved with a suitable heatsink for overheating, and with a correctly rated fuse installed at the correct voltage for overvoltage and surge current.
 
Fuse holder
 
How can fuse holder failures be prevented? The heart of a fuse holder is the fuse, so preventing holder failures means understanding fuse failure. To avoid an open circuit, designers give the thyristor a safe level of protection, so that a damaged fuse or thermal cut-out does not short the circuit and users stay protected. (Related reading: Fuse Definitions and Explanations)
 
 
Failures of fuse holders occur mainly in short-circuit conditions. Preventing them takes preparation well before the fuse is chosen: environmental and external factors affect fuse performance and shift its parameters, which damages the product and, through it, the fuse holder.
 
 
We hope this has given you a rough idea of how fuse holder failures can be prevented. If anything is unclear or not understood, customers are welcome to email or call us, or to leave a message for us on the contact page, and we will reply as soon as possible. (Recommended reading: What Is a Time-Lag Fuse?)