A process for improving the stability of NTC thermistor chips mainly involves the following steps:
Step 1, batching: conventional metal oxide powders are mixed uniformly in the required proportions;
Step 3, drying and pre-pressing: the ball-milled powder is dried and pre-pressed in a die into billets of the required shape;
Step 4, isostatic pressing: the billets are placed in an isostatic pressing chamber and consolidated into thermistor chip blocks;
Thermistor
Step 6, dicing: the partly ceramicised thermistor chip blocks are cut into thin ceramic wafers of the specified thickness;
Step 7, second sintering: the thin ceramic wafers are heated from room temperature to 1,100 °C to 1,300 °C and held for 5 to 8 hours to be sintered into NTC thermistor ceramic chips
After ageing and stabilisation through the steps above, the finished NTC thermistors offer good stability and high consistency.
These are the steps for improving NTC thermistor stability that we have summarised above. If you are interested in NTC thermistors, please leave a message for us on the Contact Us page of our website and we will reply as soon as possible. (Recommended reading: What is a thermistor and how are thermistors classified)