Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

Polymer Thermistor vs Bimetal Circuit Breaker

The main difference between polymer and ceramic thermistors lies in the material. Although polymer and ceramic differ in nature, their characteristics are much the same. A bimetal strip is a composite made up of two or more metals or other materials with suitable properties.
 
 
A polymer JDT Fuse resettable fuse is a conductive polymer material with a positive temperature coefficient. The most obvious difference between it and a fuse is that the former can be used repeatedly. Both products provide overcurrent protection, but one polymer JDT Fuse resettable fuse can provide this protection many times, whereas a fuse must be replaced with another one after it has provided overcurrent protection. (Related reading: Technical terms for positive temperature coefficient (PTC) thermistor products)
 
 
The main difference between a polymer JDT Fuse resettable fuse and a bimetal circuit breaker is that the former stays in the off state and does not reset until the fault is cleared, whereas a bimetal circuit breaker resets itself while the fault is still present, which may produce electromagnetic interference and sparks when it resets. Reconnecting the circuit while a fault is present may also damage equipment and is therefore unsafe. A polymer PTC resettable fuse keeps a high resistance until the fault is removed.
 
 
Polymer JDT Fuse resettable fuses differ from ceramic PTC resettable fuses in initial resistance, operating time (the response time to a fault event) and size. For the same hold current, a polymer WHPTC resettable fuse is smaller, has a lower resistance and responds faster than a ceramic PTC resettable fuse. (Recommended reading: What is a thermistor and how are thermistors classified)
 
 
The above is what we have compiled for you on the differences between polymer and ceramic thermistors and bimetal circuit breakers. If anything is still unclear, you are welcome to contact us.