Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

How Many Fuses Make a Socket Safe?

In everyday life, many fuse enthusiasts simply replace a blown household appliance fuse themselves when the power goes off. Far more often, though, the question of how many fuses a socket should be fitted with for safety is a common misconception. Today we will briefly explain how many fuses a socket should carry to be safe.
 
 
Fuses are usually made from an alloy of relatively high resistivity and relatively low melting point. When the current in a load circuit rises above its permitted value because of an overload or a short circuit, the heat generated melts the fuse element quickly and the fuse opens the circuit automatically. This prevents serious consequences such as a fire caused by excessive current.
 
 
A socket, especially one intended for high-power appliances, is usually fitted with a single fuse in the live wire only, rather than one fuse in each of the live and neutral wires. This is not a shortcut but a safer arrangement. (Related reading: Combining fuses with surge protective devices)
 
 
The job of the fuse in a socket is to open the circuit automatically when the current through the socket is too high (excessive total load or a short circuit), and the faster the better. A single fuse is fitted precisely for the sake of “speed”.
 
 
The fuse is fitted only in the live path of the socket mainly because: if a fuse were fitted in both the neutral and the live wire, both would have to blow on overcurrent, yet in practice only one of the two blows (once the short-circuit current in the other falls to zero, its temperature drops quickly below the melting point, so both blowing at the same time is very rare), and which one opens is a matter of chance.
 
 
We hope this article has given you a clearer understanding of how many fuses a socket should carry for safety. If anything is still unclear, please leave a message on the Contact Us page of our website and we will reply as soon as possible. (Recommended reading: Protecting automotive electronic devices with fuses)
 
 
If the fuse that blows is the one in the neutral wire, the appliance plugged into the socket appears to be dead and no current flows in the circuit. But if a person then touches the live contact inside the socket, current flows through the live wire and the body to earth and an electric shock occurs. Fitting a single fuse in the live wire is therefore safer.