In electronic products, SMD fuses serve two main purposes: protecting users from personal injury and preventing damage to the circuit. Accidents are mostly caused by other electronic equipment and produce hazards such as electrical overload, so overcurrent protection devices such as SMD fuses are needed to guard against them.
Design principle of SMD fuses: A standard fuse is a metal wire sealed in a ceramic or glass tube filled with air or sand. SMD fuses work on a completely different principle. Most of them look like standard SMD components and use a single-layer or multilayer ceramic substrate. Some earlier designs used an epoxy fibreglass substrate similar to that of a printed circuit board. (Related reading: What Package Sizes Do SMD Fuses Come In?)
The basic fuse element on top of a single-layer substrate, or between the layers of a multilayer substrate, is a highly conductive material such as copper, gold, copper-tin or silver-palladium alloy. These composite materials improve the fuse's ability to withstand inrush current, but they also lose stability under thermal stress, which raises the probability of an incorrect open after several inrush cycles.
Depending on the substrate type, the fuse element may be a laser-trimmed thick-film deposit or a chemically etched metal layer brought to the required performance, or a bonded gold wire. Because the geometry and thickness are fixed, the element opens within a defined time when an overvoltage is applied and the current reaches a given level.
For an SMD device to perform this functional role, the element must be protected from environmental conditions. In single-layer SMD fuses the element surface is usually coated with lacquer or epoxy. In multilayer SMD fuses the substrate layer around the element provides the protection itself. Because SMD fuses can be rated up to 7 A to 8 A, they need low-resistance SMD terminations. (Recommended reading: How to Choose an SMD Fuse)