Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

How Zinc Oxide Varistors Provide Protection

The body material of a varistor is a semiconductor, so it belongs to the family of semiconductor resistors. The zinc oxide ("ZnO") varistor now in widespread use is built from divalent zinc (Zn) and hexavalent oxygen (O). From the materials point of view, therefore, the zinc oxide varistor is a “II-VI group oxide semiconductor”.
 
 
A varistor is in fact a sensitive element with a non-linear voltage-current characteristic. Under normal voltage it behaves like a small capacitor; when an overvoltage appears in the circuit, its internal resistance falls sharply and it conducts at once, its operating current rising by several orders of magnitude, so that the other components in the circuit are effectively protected from overvoltage damage. Its voltage-current characteristic is symmetrical. (Related reading: Varistor (VDR) selection and points to note)
 
 
These elements are made by ceramic processing. Their internal microstructure consists of zinc oxide grains and the grain boundary layers around them. The resistivity of the zinc oxide grains is very low while that of the grain boundary layers is high, and between two grains in contact a potential barrier equivalent to a Zener diode is formed: this is one varistor cell. The breakdown voltage of each cell is about 3.5 V, and many such cells connected in series and in parallel make up the body of the varistor. The more cells in series, the higher the breakdown voltage; the larger the cross-sectional area of the substrate, the greater the current capability.
 
 
When a varistor is in operation, every varistor cell absorbs surge energy, whereas in a Zener diode only the junction region absorbs power. This is why a varistor can absorb far more energy than a Zener diode. (Recommended reading: What are the failure modes of a varistor?)
 
 
The above is a summary of how zinc oxide varistors work. If anything is unclear, please leave a message for us on the Contact Us page of our website and we will reply as soon as possible.