Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

Fuse Protection Design in Automotive Circuits

Circuit protection in a car is everywhere, all the more so now that the body carries more and more intelligent electronic devices, turning what was once pure automotive machinery into a “running robot” with a soul. For electronic products, safety comes first, and that is why fuses in automotive circuits have become more integrated and more compact.
 
 
In automotive electronics development, almost every electrical load needs a fuse, usually called cable protection. The main function of the fuse is to limit the rise in current: when something unexpected happens (for example a short circuit of the supply caused by a crash), the resulting high current must be interrupted at the main supply by the fuse immediately, to prevent further danger. (Related reading: Automotive fuse industry: current status and changing landscape)
 
 
The protection architecture of conventional automotive cable fuses is multi-stage and hierarchical: when a fault occurs in the lowest-level electronic unit, only the fuse of the faulty unit opens and the circuit above it is unaffected.
 
 
During vehicle modification, however — for example when a high-power audio system is added and takes its power from the body battery — improper fuse selection can mean the fuse does not open when it should. These small faults then affect the reliability of the whole vehicle system and cause the fuse to operate incorrectly, so good fuse design and selection is especially important. (Recommended reading: Automotive fuses: what you need to know)
 
 
So in automotive circuits we should not only have a rough understanding of the basic structure of the car, but also be familiar with where fuses are located in the circuit; only then can we stay safe on the road.