Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

How to Select Fuses for Automotive Circuits

In the design of automotive electrical systems, people tend to concentrate on the function of each electrical device and neglect the protection of those devices. Without effective protection, automotive electrical equipment can set the vehicle on fire. In statistics on the causes of highway vehicle fires, 30% of self-ignition cases are traced to burning wiring harnesses: a conductor melts under overload, ignites and sets the car alight.
 
 
Electrical loads in a vehicle are usually protected by fuses. Several points call for attention when a fuse is chosen: the applicable voltage, the breaking speed, the time-current characteristic and the temperature correction characteristic. But if a fuse is selected without careful consideration of the ambient temperature and without temperature correction, safety can no longer be guaranteed under harsh operating conditions. A car, and a passenger car in particular, is a vehicle with very high safety requirements, and harsh conditions are far from rare, so the hidden risk is considerable. (Related reading: Protective Design with Fuses in Automotive Circuits)
 
 
The influence of ambient temperature on the fuse itself must therefore be taken into account when a fuse is selected. The difference between high and low temperature has a great bearing on the current-carrying capacity of a fuse. For a typical fuse, the relationship between temperature and load capacity is approximately linear.
Automotive fuses
 
At an ambient temperature of about 25 °C, load capacity is about 100%; above 25 °C it falls, reaching about 91% at 85 °C; below 25 °C it rises, reaching about 105% at around -10 °C. (Recommended reading: How Fuses Protect Automotive Electronic Devices)
 
 
As automotive electronics advance rapidly and automotive safety regulations become ever stricter, the development of automotive fuses has been comparatively slow, which is bound up with the extremely high safety demands placed on them. Safety and reliability will always be the standing requirement for a fuse, and only by deepening our understanding and pursuing further research can we keep pace with the times.