Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

Overcurrent Protection with Resettable Fuses

In everyday life, resettable fuses are found almost everywhere. As summer arrives, air conditioners run more and more often, and they are in sight wherever you go. Small household appliances have now become the main theme of home electronics consumption, so safety is on the minds of hundreds of millions of people. In air conditioners, resettable fuses provide overcurrent and overtemperature protection for the control board, making the product safer and more reliable by design.
 
 
Resettable fuses deliver overcurrent protection——A resettable fuse is made from high-tech polymer resin and nano-scale conductive particles through a special process. Under normal conditions the nano conductive crystals form conductive chains along the polymer matrix and the fuse works normally.
 
 
When the circuit is short-circuited or overloaded, the large current flowing through the fuse raises its temperature. On reaching the Curie temperature its state density falls rapidly and the phase transition grows; the internal conductive paths either change in an avalanche manner or break, and the fuse switches abruptly to a high-resistance state. The current is then cut off quickly, giving the circuit fast and accurate limiting and protection. The small residual current keeps the fuse in the protected state; once the power is switched off and the fault is cleared, the temperature drops, the state density rises, the phase transition reverses and the nano crystals return to conductive chains, so the resettable fuse recovers to its normal state without manual replacement. (Related reading: Structure of the PTC resettable fuse)
 
 
The most important use of a resettable fuse is overcurrent protection in a circuit. Any circuit with precision instruments must contain a fuse to protect those instruments. But if the fuse has to be replaced by hand every time it operates during frequent use, that is simply impractical——and this is where the resettable fuse comes in. It reconnects the circuit current automatically, so no manual replacement is needed, which greatly increases working efficiency.
 
 
Overcurrent protection with resettable fuses——Overcurrent protection is the process in which, when the instantaneous voltage in a circuit rises too high because of violent current fluctuation, certain electronic devices block the surge current before it can damage critical instruments, thereby protecting them. The device that blocks the surge current in this process is usually a fuse, but an ordinary fuse is one-shot only; with a resettable fuse, instruments in such a circuit can be used for trial work. (Related reading: SMD resettable fuse manufacturer)
 
 
Giving the circuit overcurrent protection with a resettable fuse, without damaging the basic instruments, lets you use the instruments with confidence. This function is not unique to resettable fuses——some thermistors can do it too, but those devices respond far more slowly than a resettable fuse. In a circuit with precision instruments, if such a thermistor is used, the surge current will burn out the instruments before the thermistor blocks the circuit.
 
 
Overcurrent protection with resettable fuses——This overcurrent protection makes resettable fuses very popular in the market. Because such fuses are simple in structure and easy to use, they are gradually replacing conventional one-shot fuses and becoming the mainstream. (Recommended reading: How fuses protect automotive electronic devices)
 
 
That is a brief explanation of overcurrent protection with resettable fuses. If anything is still unclear, you are welcome to leave a message for us on the Contact Us page and we will reply as soon as possible.