Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

Can Fuses Be Connected in Parallel?

Our reader “Alone On The Way” asked by e-mail: can fuses be connected in parallel, and what should we watch out for in practical applications? (Related reading: resettable PPTC fuses for input and output protection of LED drivers)
 
 
A specialist from Joincircuit replies: in practical electrical environments, fuses of a suitable rating are selected by weighing many factors against the applicable safety requirements. The fusible element inside the fuse is what is commonly called the fuse, and it is usually made of pure copper, lead-antimony alloy and similar materials. When a fault current rises above the breaking value, the element melts automatically after a certain period (the higher the current, the shorter the breaking time), protecting the electrical equipment and the circuit.
 
Fuse
 
Fuse
 
Repeated tests by engineers have shown that the relationship between breaking time and actual current, also called the breaking characteristic of a fuse, is what governs this: the breaking current of a fuse is not equal to its rated current. For a fuse made of at least 98% lead with 0.5% to 1.5% antimony, for example, the breaking current is roughly twice the rated current.
 
 
In real power systems, however, fuses are often selected according to the specific conditions, empirical data and production environment, and there are also cases where several fuses are connected in parallel. (Recommended reading: operating current characteristics and recovery behaviour of resettable fuses)
 
 
So fuses can be connected in parallel in a circuit; in normal use, however, the surrounding environment and the various external parameters should be taken into account.
 
 
We hope this brief overview has given you a new understanding of fuses. If anything is still unclear, leave a message for us on the Contact Us page and we will reply as soon as possible.