
0.20 A hold current, 60 V maximum voltage, 1812 (4532) package. Same 0.20 A rating and same 6.0 Ω post-trip resistance a
The MF-MSMF020/60-2 is an 1812 surface-mount resettable fuse with a 0.20 A hold current and a 60 V maximum voltage. It measures 4.5 × 3.2 mm, has gold-plated terminals, and is suitable for reflow soldering. UL, CSA and TÜV recognised, RoHS compliant. The 60 in the suffix is the voltage rating, twice that of the MF-MSMF020-2 at the same 0.20 A hold current. It is used for overcurrent protection on 24 V and 48 V supplies, industrial control boards and communication equipment.
| Parameter | Value |
| Hold current | 0.2 A |
| Trip current | 0.4 A |
| Maximum voltage | 60 V |
| Maximum fault current | 40 A |
| Initial resistance | 0.4 Ω |
| Post-trip max resistance | 6 Ω |
| Trip current / time | 1.5 A / 0.15 s |
| Dissipated power | 0.8 W |
| Package | 1812 SMD (4532 mm) |
| -40℃ | -20℃ | 0℃ | 23℃ | 40℃ | 50℃ | 60℃ | 70℃ | 85℃ | |
| Hold current (A) | 0.29 | 0.26 | 0.23 | 0.2 | 0.17 | 0.15 | 0.14 | 0.12 | 0.1 |
| Share of 23 °C rating | 145% | 130% | 115% | 100% | 85% | 75% | 70% | 60% | 50% |
| Model | Vmax | R1max | Package | Note |
| MF-MSMF020 | 30 V | 6 Ω | 1812 SMD (4532 mm) |
The MF-MSMF020/60-2 is a polymer resettable fuse with a 0.20 A hold current and a 60 V maximum voltage. The 0.20 A rating suits loads in the tens to low hundreds of milliamperes, such as sensor supplies, small circuit cards and communication interfaces. Once the fault is cleared and the part cools, it returns to conduction on its own and needs no replacement.
1812 package, 4532 in metric, 4.5 mm long, 3.2 mm wide and 0.75 mm high. Gold-plated terminals at both ends, black body, with the model code and production lot marked on top. Supplied on tape and reel for automatic pick-and-place, and also suitable for hand soldering. The reel label carries the full model number including /60; the 30 V part shares the same 0.20 A rating and body, so check the label when changing reels.
The fuse sits in series with the circuit. At 23 °C and 0.20 A it presents 0.4 Ω, which is 0.08 V across it. Above 0.40 A the internal material expands with heat and its resistance rises sharply, limiting the current to a small value and protecting the circuit behind it. At 1.5 A it opens within 0.15 s.
When power is removed or the fault disappears and the part cools, it returns to its low-resistance state and the circuit resumes normal operation. Post-trip resistance is 6.0 Ω maximum, which is 1.2 V at 0.20 A. On a 24 V rail that is 5% of the supply, so the downstream circuit has to tolerate the drop. The same part can trip and reset repeatedly.
Full parameters are in the datasheet, downloadable from this page, including temperature derating, time-current curves and package dimensions. This is the only 0.20 A part in the series rated above 30 V, so 48 V systems have no alternative at this current. On a 24 V rail where prospective fault current can exceed 40 A, use the MF-MSMF020-2. For lot confirmation, stock enquiries or parameter-based alternatives, please contact our sales team.
Hold current and post-trip resistance match the MF-MSMF020-2 exactly: 0.20 A and 6.0 Ω. The single difference is the voltage rating, 60 V here against 30 V there. A 48 V battery pack reaches 54.6 V when fully charged, which punctures the 30 V part on the first power-up, so only this part works there. A 24 V rail that rings above 40 V during switching needs it as well.
Interrupt rating is the largest current the fuse can break safely. This part is rated 40 A, and the MF-MSMF020-2 at the same 0.20 A is rated 80 A. A rail fed straight from a 24 V battery can deliver hundreds of amperes into a short, and 40 A is short of that, so the 020 is the right part on such a rail. Where 60 V and 100 A are both required, the Joincircuit ASMD1812-020-60V covers the pair at 5.0 Ω post-trip, 1 Ω below this fuse.
0.20 A suits loads from tens to low hundreds of milliamperes. The usable current also derates with temperature: 0.14 A at 60 °C and 0.10 A at 85 °C. With a load that stays above 0.15 A inside a warm enclosure there is nothing left, and the next step up is the MF-MSMF030-2.