≡ Param Finder by package / current / voltage
3590S-2-103L 10 kΩ 3590系列微调电位器
上一张
  • 3590S-2-103L 10 kΩ 3590系列微调电位器
下一张

Bourns 3590S-2-103L Trimmer Potentiometer 10 kΩ 3590 Series

Bourns 3590S-2-103L ⌀22.2×12.2 mm 10-turn trimmer potentiometer, 10 kΩ, tolerance ±5%, 2 W power rating. For on-board bias, reference and zero calibration.

Download

0

The 3590S-2-103L is a 10-turn panel-mount wirewound precision potentiometer, body ⌀22.2×12.2 mm, rated 10 kΩ ±5 % with ±0.25 % independent linearity and 2 W. Metal bushing 3/8-32 UNF, shaft 6.34 mm, solder lugs, one lockwasher and one mounting nut in the box.

Brand:BOURNS (Joincircuit is an authorised distributor)
Category:Trimmer potentiometer / 3590 系列
Resistance:10 kΩ;Power rating:2 W

Specifications

ParameterValue
Series3590
Nominal resistance10 kΩ
Resistance tolerance±5 %
Power rating2 W
Turns10 turns
Linearity±0.25 %
Temperature coefficient±50 ppm/℃
Mechanical rotation3600 °
Dimensions⌀22.2×12.2 mm

Other Resistances in This Series

ModelResistanceTolerancePower
3590S-2-502L5 kΩ±5 %2 W

Product Description

What this product is

The 3590 mounts on an enclosure panel, turned by hand or through a knob, with 10 turns covering the full 3600° travel. The wirewound element with ±0.25 % linearity suits setpoint inputs: output voltage on a bench supply, a dial on a test rack, an HMI control knob.

Dimensions and appearance

Body ⌀22.2×12.2 mm with a metal bushing 9.53 mm across (3/8-32 UNF) and a 6.34 mm shaft that takes the knob on the panel side. The panel hole is ⌀9.53 mm for panels 2.46 mm to 3.81 mm thick. Solder lug terminals at the rear, connected by soldering.

How it works

The three terminals are the two element ends and the wiper, and a lead screw carries the wiper through 10 turns, 3600°, idling past the ends. A divider taps the wiper against one end and the output rises evenly across those turns; ±0.25 % is the largest gap between the measured curve and a straight line.

How to choose

In the part number, 103 is the resistance code: the first two digits 10 are the significant figures and the third digit 3 means × 10³, so 10 kΩ; 502 is 5 kΩ. At 10 kΩ, 2 W allows 141 V. Tolerance ±5 % is ±500 Ω while ±0.25 % linearity governs straightness, two separate figures.

Parameters and documentation

The full datasheet runs from page 1 to page 3 and can be downloaded from this page, with the eight shaft and bushing configurations, the panel cut-out drawing and the recommended part list. Operating range -40 °C to +125 °C, rotational life 1,000,000 shaft revolutions, weight about 19 g. For shaft length or thread specification, contact our sales team.

Selection Notes

1. The 2 W rating is at 40 °C, derate inside an enclosure

The datasheet gives 2 W at 40 °C and 0 W at 125 °C; interpolating linearly leaves 1.3 W at 70 °C. On 10 kΩ that 1.3 W works out to 114 V at 11.4 mA, so size a machine that sits at 70 °C against that.

2. Ten turns across 10 kΩ leaves 1 kΩ per turn

One degree is 2.8 Ω. The wirewound resolution of 0.020 % is 2 Ω, about 0.7° of rotation, far finer than a hand can place a single turn. Where millivolt output matters, work the margin from the resolution first, then judge whether a hand can hold the setting.

3. Panel hole ⌀9.53 mm, panel 2.46 mm to 3.81 mm thick

The 3/8-32 UNF bushing is 7.94 mm long and ships with a lockwasher and nut, so thicker panels need a spacer. The 6.34 mm shaft takes a 1/4 inch imperial knob; a 6 mm metric knob sits loose on it.