Hold current 0.50A. Maximum voltage 60V. SM package. For fan and relay circuits in 48V communication equipment. Post-trip resistance 1.4Ω. Breaking capacity 40A. Automatic recovery after fault removal.
| Parameter | Value |
| Hold current | 0.5 A |
| Trip current | 1 A |
| Maximum voltage | 60 V |
| Maximum fault current | 40 A |
| Initial resistance | 0.35 Ω |
| Post-trip max resistance | 1.4 Ω |
| Trip current / time | — A / — s |
| Dissipated power | 1.7 W |
| Package | SM package |
A 72V DC rail sits at 72V in normal operation, with higher peaks. Voltage above 60V across this part causes breakdown; after breakdown the element opens and the whole downstream circuit loses power. On a 48V system the 60V rating leaves 12V of headroom, which is enough. For 72V at the same current, use the MF-RX series, where all six parts are 72V.
Fresh resistance is 0.35Ω for 0.18V. After a trip and reset the limit is 1.4Ω, or 0.70V. On a 48V rail 0.70V is only 1.5 percent and does not affect operation. On a 12V auxiliary supply 0.70V is 5.8 percent, so downstream modules need input range reserved for it.
MF-NSMF050 holds 0.50A, is rated 13.2V, breaks 100A, and has 0.7Ω post-trip resistance for 0.35V drop. Its breaking capacity is more than double this part's 40A, its drop is half, and the body is smaller. Below 13.2V circuit voltage there is no reason to stay on this SM part.