≡ Param Finder by package / current / voltage

Hold current 0.75A. Maximum voltage 30V. SM package. For overcurrent protection on 24V industrial control boards and security equipment. Post-trip resistance 1.0Ω. Breaking capacity 80A. Automatic recovery after fault removal.

Brand:BOURNS (Joincircuit is an authorised distributor)
Category:Resettable fuse / SMD, SM package
Voltage:30 V; Current:hold 0.75 A; trip 1.5 A.

Specifications

ParameterValue
Hold current0.75 A
Trip current1.5 A
Maximum voltage30 V
Maximum fault current80 A
Initial resistance0.23 Ω
Post-trip max resistance1 Ω
Trip current / time— A / — s
Dissipated power1.7 W
PackageSM package

Same-Package Alternatives

ModelVmaxR1maxPackageNote
MF-SM075/6060 V1 ΩSM package

Selection Notes

1. The 30V 075 and the 60V 075/60 differ eightfold in breaking capacity

Both hold 0.75A and trip at 1.50A, with resistances of 0.23Ω and 1.0Ω. This part is rated 30V and breaks 80A; the one with 60 after the slash is rated 60V and breaks only 10A. The number after the slash is the voltage rating, not a revision. Buying this part for a 24V rail means breakdown at the first voltage spike. Buying the 075 for a 48V rail gives the same breakdown.

2. 0.75V post-trip drop takes 6 percent of a 12V rail

Fresh resistance is 0.23Ω for 0.17V at 0.75A. After reset the limit is 1.0Ω, or 0.75V. On a 24V system 0.75V is 3 percent and acceptable. On a 5V system it is 15 percent, so downstream logic chips need their input threshold recalculated against 4.25V.

3. There is a 0.75A 0805 part, but only rated 6V

MF-PSMF075X holds 0.75A, breaks 40A, and has 0.35Ω post-trip resistance for 0.26V drop. This part's 1.0Ω is nearly three times that, adding 0.49V of drop. A 5V board is better off with the 0805; only a 12V circuit requires this 30V SM part.

Up Page:

Next Page: