≡ Param Finder by package / current / voltage

Hold current 1.80A. Maximum voltage 33V. SM package. For overcurrent protection of 24V automotive and industrial control modules. Post-trip resistance 0.15Ω. Breaking capacity 40A. Automatic recovery after fault removal.

Brand:BOURNS (Joincircuit is an authorised distributor)
Category:Resettable fuse / SMD, SM package
Voltage:33 V; Current:hold 1.8 A; trip 3.6 A.

Specifications

ParameterValue
Hold current1.8 A
Trip current3.6 A
Maximum voltage33 V
Maximum fault current40 A
Initial resistance0.04 Ω
Post-trip max resistance0.15 Ω
Trip current / time— A / — s
Dissipated power1.9 W
PackageSM package

Selection Notes

1. The 1.80A step tops out at 33V, with no 60V version

The 60V SM parts come in only three current steps, 0.30A, 0.50A and 0.75A, none reaching 1.80A. The 33 after the slash is the voltage rating, so a 48V system across this part breaks it down. For 1.80A at 48V the only option is MF-RX185/72, which is DIP through-hole.

2. 0.27V drop and 1.9W of trip dissipation

Fresh resistance is 0.04Ω for 0.072V at 1.80A. After reset the limit is 0.15Ω, or 0.27V. On a 24V circuit 0.27V is 1.1 percent and can be ignored. On a 5V circuit it is 5.4 percent, and downstream parts need that margin. At the moment of trip 1.9W lands in the body, so do not place tall components around it.

3. The same-current DIP part is 72V with lower drop

MF-RX185/72 holds 1.85A, is rated 72V, breaks 40A, and has 0.12Ω post-trip resistance for 0.22V drop. Switch to it where circuit voltage exceeds 33V or 72V margin is required. If assembly must be surface mount, this page's part stops at 33V.

Up Page:

Next Page: