≡ Param Finder by package / current / voltage

Hold current 2.00A. Maximum voltage 15V. SM package. For overcurrent protection of 12V high-current branches and USB power feeds. Post-trip resistance 0.125Ω. Breaking capacity 100A. Automatic recovery after fault removal.

Brand:BOURNS (Joincircuit is an authorised distributor)
Category:Resettable fuse / SMD, SM package
Voltage:15 V; Current:hold 2 A; trip 4 A.

Specifications

ParameterValue
Hold current2 A
Trip current4 A
Maximum voltage15 V
Maximum fault current100 A
Initial resistance0.045 Ω
Post-trip max resistance0.125 Ω
Trip current / time— A / — s
Dissipated power1.9 W
PackageSM package

Same-Package Alternatives

ModelVmaxR1maxPackageNote
MF-SMDF20010 V0.1 ΩSM package

Selection Notes

1. 2.00A comes only with 15V, so it cannot go on a 24V board

This part is rated 15V and breaks 100A. A 24V rail sits at 24V, which breaks it down immediately. The 2.00A SM step exists only at 15V and at 10V in MF-SMDF200. For 2.00A surface mount at 24V the SM series has no part, so switch to DIP MF-RX250/72.

2. 0.25V post-trip drop and 1.9W at trip

Fresh resistance is 0.045Ω for 0.09V. After reset the limit is 0.125Ω, or 0.25V. The 2.50A part in the same series limits at 0.085Ω for 0.21V, which is 0.04V lower than this part. For still lower drop, look at MF-SM250.

3. The other 2.00A surface-mount version is rated only 10V

MF-SMDF200 holds 2.00A, breaks 40A, and has 0.1Ω post-trip resistance for 0.20V drop and 1.1W dissipation. On a 5V circuit it halves the dissipation. This 15V part leaves more margin and breaks 100A, at the cost of 1.9W. Decide by circuit maximum voltage and short-circuit current, not by dissipation alone.

Up Page:

Next Page: