≡ Param Finder by package / current / voltage

Hold current 2.50A. Maximum voltage 15V. SM package. For overcurrent protection of 12V power distribution and LED drivers. Post-trip resistance 0.085Ω. Breaking capacity 100A. Automatic recovery after fault removal.

Brand:BOURNS (Joincircuit is an authorised distributor)
Category:Resettable fuse / SMD, SM package
Voltage:15 V; Current:hold 2.5 A; trip 5 A.

Specifications

ParameterValue
Hold current2.5 A
Trip current5 A
Maximum voltage15 V
Maximum fault current100 A
Initial resistance0.024 Ω
Post-trip max resistance0.085 Ω
Trip current / time— A / — s
Dissipated power1.9 W
PackageSM package

Selection Notes

1. 2.50A is the highest surface-mount current, but rated only 15V

The same-current DIP parts are MF-R250 at 30V and MF-RX250/72 at 72V. This part is 15V, just enough for a 12V circuit and a breakdown on a 24V one. For 2.50A above 24V, the only option is one of those two DIP parts.

2. 0.21V drop, the lowest of the steps above 2A

Fresh resistance is 0.024Ω, giving 0.06V at 2.50A and 0.31W in normal operation. After reset the limit is 0.085Ω, or 0.21V and 0.53W. At the moment of trip dissipation reaches 1.9W, so both pads need enough copper or the joints heat up first.

3. Only 0.50A apart from the 2.00A MF-SM200

Both are 15V, 100A and 1.9W in the same package. This part trips at 5.00A and MF-SM200 at 4.00A. At a normal load of 1.80A choose SM200, whose trip point sits closer to the load and cuts sooner on a short. Only above 2.30A of normal load is this part needed.

Up Page:

Next Page: